The best method for efficient and lasting callus removal.
The Callus Control Concept works for everyone! The reason is simple: when applied correctly, a chemical process is triggered that ultimately delivers a range of advantages over all other callus removal methods.
We also know: for beginners, the application can sometimes be a little challenging. To get off to a great start and experience that satisfying "aha moment", it helps to keep a few things in mind.
If you follow these points, nothing will stand between you and your personal aha moment from the very first application.

The callus needs to be in contact with the solution for approx. 10 minutes.
No contact, no effect! The solution is applied to the skin using a layer of cotton wool, which acts simply as a medium to keep the solution in contact with the callus.
- Always split the cotton wool into thin layers – this way you'll use less solution
- Apply the solution directly onto the cotton wool at the foot
- Press the moistened cotton wool firmly against the callus – a bottle cap works perfectly
- If you can see the skin shimmering through the wet cotton wool as shown in the image, you've done it right

Don't let moistened callus dry out.
Re-moisten if the application dries out! Callus absorbs the solution like a sponge, which can cause the skin and cotton wool to dry out before the time is up. In this case:
- Re-moisten the treated area briefly with the solution before removing
- Allow it to work for a few more minutes
- Only then proceed with the actual callus removal


Warm and dry.
For the solution to work to its full effect, the skin should be warm to the touch and dry!
- Do not soak your feet before application
- Let sweaty feet dry completely before applying
- If your skin is very cold, warm the soles of your feet gently beforehand
It works – every time!
Follow these 3 points and even as a beginner you'll experience the desired aha moment from your very first application. The solution simply triggers a chemical process that softens callus within minutes. To allow this process to work effectively, keep the above points in mind. In summary:
- Your skin should be dry and not too cold before application
- Make sure the solution actually reaches the callus in sufficient quantity
- Use the sweet spot for removing the softened callus. Don't wait too long – if the callus starts to dry out again, reactivate the process by re-moistening


